The easiest way to Shorten a Zipper. No tools needed!

UPDATED ON: | IN: , , , , | BY:
_________

Learn two easy ways on how to shorten a Zipper using the original stopper pieces. 

I know that adding zippers to your projects and garments is something we enjoy greatly.

But the actual sewing them part is sometimes a bit frustrating. 

Zippers come in a lot of sizes, materials, and colors. And yet sometimes, we still need to modify them to make them fit our projects. 

A clear example is the title of this tutorial. Today I will show you how to shorten a Zipper from the top and the bottom. And also how to remove the teeth so they will look like they came that way.

how to shorten a zipper

NOTE: This post contains affiliate links, which means that if you make a purchase using one of the links in this article, I may earn a commission at no extra cost to you (To know more about this, click here.)

The easiest way (at least for me) to shorten a Zipper is always from the bottom. 

This is because I use the original stoppers of the zipper. And the bottom only has one pin/stopper (the top has two). So it’s quicker for me. 

Of course, you can also shorten it from the top. 

For example, do that if, for example, you are trying to shorten a zipper that is already sewn in a garment, such as a dress.

How to cut a zipper to make it shorter?

There are a few ways in which you can cut a zipper. Well, actually, there is only one way to cut it… With a pair of scissors.

The thing you can do differently is to remove the teeth of the zipper and make a new stop.

You need to make a stop; otherwise, when you pull your tab up or down to close or open the zipper, it will fall out.

You can make a new stop by using the original metal pieces of the zipper. Or you can also use your sewing machine to make a stitch that covers the teeth.

If you want to use the original stoppers (ideal situation), you need a pair of tweezers, pliers, or an end snipper like this one.

An end snipper is a handy and affordable tool that can help you remove your zipper stops and teeth. 

In my opinion, it is a pretty worth it tool to have around if you sew a lot.

How to Shorten a Zipper. Removing the teeth and using the Original Stoppers.

how to shorten a zipper

Nylon zippers are the most common ones out there. 

And here are the good news! They are also the easiest to shorten. Read this tutorial to learn how to do it, and check out the video tutorial at the end so you can see me doing these steps live.

How to Shorten a Zipper from the Top.

To shorten a nylon zipper from the top, you first need to mark where you want the zipper tab to end. 

This means that you need to mark the exact place the zipper tab will stop going up.

Then make a second mark above that first mark. Exactly ½” to ¾” up.

Use a couple of tweezers or pliers to open and remove the zipper stops from each side of the zipper top.

Put them in a safe place! 

You need to relocate the stopper by installing it above the first mark you made at the beginning on each side.

how to shorten a zipper

Put the flat part of the stopper on the back and insert the pointy ends through the fabric. You will end up with sharp ends on both sides of the teeth. 

Use the back of the tweezers to push the pointy ends to the center of the teeth. It’s like you are hugging each side of the teeth with that stopper.

Repeat on the other side. 

An important step is to check if the zipper tab can go up and down without issues. So test it before doing anything else. 

If everything is OK, it’s time to cut the extra length of your zipper.

Use your fabric scissors to make a clean cut on THE SECOND mark you made. 

You can seal the raw edges of this part with a lighter or by using sewing glue.

How to Shorten a Zipper from the Bottom.

Shortening a zipper from the bottom is more effortless. Both to remove the stopper and reinstall it.

Use your tweezers to open the pointy ends on the back of the bottom zipper stopper. That’s the metal part at the center of it.

Pull it to remove it, and then reinstall it from the front of the zipper by the mark where you want the zipper to stop. 

Push the pointy ends to each side of the closed teeth, and once they are on the back of the zipper, push them to the center to secure the stopper.

Finally, measure ½” to ¾” from the end of the stopper down so you can cut there to remove the excess.

How to Remove the Teeth on a Nylon Zipper.

how to shorten a zipper

The teeth on a Nylon zipper are built with a single plastic string. This string is made in a spiral around the inner edge of each zipper’s side.

To undo this spiral, you must pull the first teeth and “unfold” it. Then use a pair of small scissors to cut this strip as close to the base as possible.

It’s all repeated from there until you get to the stopper.

You have to remove each tooth individually so the zipper won’t get damaged. 

And it’s the same process on the top and the bottom teeth.

Cutting a zipper and removing the teeth-Video Tutorial

How do you make a new zipper stopper with thread?

how to shorten a zipper

If you are in a hurry or just don’t want to mess with the metallic pieces of your zipper, you can do this.

Instead of using the stoppers, we can make one with thread.

You can do this by hand or with your sewing machine.

Thread a hand needle and sew around the top of the opened zipper teeth or the closed teeth on the bottom to do it by hand.

Pass the needle around the teeth about 6-7 times and make a knot to secure the end of the seam.

To make a new stopper with a sewing machine, do this.

First, lower your feed dogs. Then, place the closed zipper under your presser foot.

Match the middle of the zipper with the center of the presser foot.

Choose a zig-zag stitch and use your hand wheel to lower the needle to check if it falls on the sides of the teeth when you lower it.

If it doesn’t, increase the width of the stitch until it does.

Then press your foot controller and make between 6-7 stitches. Pull the threads and make a knot by hand on the back.

How do you remove the teeth of a metallic Zipper?

To shorten a metallic zipper, you can also use the original stoppers.

The stoppers of a metallic zipper are different, so you will need a pair of pliers to remove them. 

I don’t recommend using any other tool. This type of zipper teeth is very firmly attached, and you could hurt yourself.

Make a mark where you want the zipper to end. You can use a marking tool that disappears. 

Remove the stoppers with the help of the pliers.

Next, use the same pliers to remove only one of the teeth above the marked line. 

Reinstall the stoppers where the tooth was. Now you can safely remove the leftover zipper teeth.

Sew this pattern has a perfect picture tutorial on how to shorten a metallic zipper here.

How to shorten a separating Zipper?

Always cut the excess measurement of a separating zipper from the top!

The bottom part is crucial, as is the one with the mechanism that can separate the zipper.

These types of zippers come in all materials—nylon, metallic, and with stronger teeth (like the ones you would use on jackets).

So depending on the material is the technique you will use.

If it is a Nylon zipper, use the video technique above.

Remove the stoppers and teeth with pliers and an end snipper for a metallic zipper.

If it is a jacket zipper, shorten it by pulling the teeth with pliers and making a new stop with thread and needle.

And that’s it! Do you have any questions?? Please write them in the comments below so I can assist you in your zipper endeavors.

Don’t forget to follow us on Social Media!!

4 thoughts on “The easiest way to Shorten a Zipper. No tools needed!”

  1. Good afternoon,
    Please give me some advice on fixing an open-ended zipper. It’s last elongated tooth, the one that slides in at the bottom of the zipper, torn off?
    It’s my husband’s Sherpa lined jacket. It has a metal zipper which is otherwise intact.

    Reply

Leave a Comment